You are here

Doosan DL280-5

Specs

Engine
Rated Flywheel Power (Gross)171.7 hp @ 2,100 rpm
Rated Horse Power (Net)171.7 hp @ 2,100 rpm
Max. Torque (Net)593 lbf·ft @ 1,400 rpm
Hydraulic System
Main Pump: Displacement6.1 in³/rev
Boom Speed - Up (Loaded)6.3 s (±0.5 s)
Boom Speed - Down 3.2 s (±0.4 s)
Bucket Speed - Dump1.3 s (±0.3 s)
Main Pump: Max. Flow Rate (each)55.48 gal/min
Main Pump: Main Relief Pressure3,843 psi
Total Cycle Time10.9 s (±0.3 s)
Travel System/Drive Mechanism
Travel performance: Gradeability30°
Traveling performance: Max. Tractive Effort24,000 lb
Weights
Operating Weight34,262 lb, 34,262 lb, 35,168 lb, 35,168 lb, 36,345 lb, 35,234 lb
Dimensions
Bucket Capacity3.66 yd³, 3.66 yd³, 3.66 yd³, 3.66 yd³, 3.66 yd³, 3.66 yd³
Bucket Width8' 11", 8' 11", 8' 11", 8' 11", 8' 11", 8' 11"
Hinge Pin Height12' 11", 12' 11", 14' 3", 14' 3", 13' 0", 14' 6"
Dump reach at 45° (fully raised)3' 9", 3' 9", 3' 10", 3' 10", 3' 10", 3' 9"
Dump height at 45° (fully raised)9' 2", 9' 2", 10' 7", 10' 7", 10' 7", 9' 2"
Overall Height10' 10", 10' 10", 10' 10", 10' 10", 10' 11", 10' 11"
Overall Length25' 3", 25' 3", 25' 3", 25' 3", 25' 3", 25' 3"
Wheel Base9' 10", 9' 10", 9' 10", 9' 10", 9' 10", 9' 10"
Ground Clearance1' 3", 1' 3", 1' 3", 1' 3", 1' 5", 1' 5"
External Turning Radius at Bucket Edge19' 11", 19' 11", 20' 8", 20' 8", 20' 8", 19' 11"
Static Tipping Load (Straight)26,486 lb, 26,486 lb, 22,273 lb, 22,273 lb, 29,357 lb, 22,273 lb
Static Tipping Load (Full Turn)23,389 lb, 23,389 lb, 19,667 lb, 19,667 lb, 25,922 lb, 19,667 lb
Breakout Force30,349 lbf, 30,349 lbf, 28,551 lbf, 28,551 lbf, 28,551 lbf, 30,349 lbf
Rear Axle Oscillation22°
Transmission
Travel Speed Forward - 1st gear3.91 mph, 3.91 mph, 3.91 mph, 3.91 mph, 4.1 mph, 4.1 mph
Refill Capacities
Fuel Tank62.08 gal
Cooling System8.35 gal
Hydraulic System39.63 gal
Hydraulic Tank31.7 gal