You are here

Doosan DL250TC-5

Specs

Engine
Rated Flywheel Power (Gross)171.7 hp @ 2,100 rpm
Rated Horse Power (Net)171.7 hp @ 2,100 rpm
Max. Torque (Net)593 lbf·ft @ 1,400 rpm
Hydraulic System
Main Pump: Displacement4.52 in³/rev
Boom Speed - Up (Loaded)5.8 s (±0.5 s)
Boom Speed - Down 2.9 s (±0.4 s)
Bucket Speed - Dump2.1 s (±0.3 s)
Main Pump: Max. Flow Rate (each)40.95 gal/min
Main Pump: Main Relief Pressure3,843 psi
Total Cycle Time10.8 s (±0.3 s)
Travel System/Drive Mechanism
Travel performance: Gradeability30° @ 58 %
Traveling performance: Max. Tractive Effort26,455 lb
Weights
Operating Weight31,592 lb
Dimensions
Bucket Capacity3.27 yd³
Bucket Width8' 11"
Hinge Pin Height12' 10"
Dump reach at 45° (fully raised)4' 3"
Dump height at 45° (fully raised)9' 0"
Overall Height10' 9"
Overall Length25' 7"
Wheel Base9' 10"
Ground Clearance1' 5"
External Turning Radius at Bucket Edge20' 2"
Static Tipping Load (Straight)20,470 lb
Static Tipping Load (Full Turn)18,078 lb
Breakout Force22,930 lbf
Rear Axle Oscillation22°
Transmission
Travel Speed Forward - 1st gear4.1 mph
Refill Capacities
Fuel Tank62.08 gal
Cooling System8.29 gal
Hydraulic System39.63 gal
Hydraulic Tank31.7 gal