You are here

CF22 Fixed Harvesting Head


IQAN Control System

IQAN system offers precise control of the harvesting head at all times.

360-Degree Rotation

360-degree continuous rotation with center hose routing enhances maneuverability when cutting, while also protecting hoses from tangling or tearing, thereby reducing hose replacement costs.

Low Maintenance

Built with fewer moving parts, the CF22's only daily service requirements is greasing, thereby reducing downtime.

Overall Height 85" (216 cm)
Width (Arms Open) 66.75" (170 cm)
Width (Arms Closed) with thumb 57.5" (146 cm)
Total Operating Weight 6,000 lbs (2,722 kg)
System Parker IQAN
Valve Package Parker
Hydraulic Flow Requirement (Minimum) 80 GPM (302 LPM)
Hydraulic Pressure Requirement (Minimum) 4,500 psi (310 bar)
Joral Encoders Non-contact quadrature
Electrical System Voltage 24-volt
Delimb Pressure Adjustable with float
Top Delimb Knife Fixed
Movable Delimb Arms 2
Maximum Knife Opening 33.5" (851 mm)
Maximum Full Coverage Delimb Diameter 22" (559 mm)
Minimum Full Coverage Delimb Diameter 4.5" (114 mm)
Main Saw - Bar Pitch 0.75" (19 mm)
Bar Length 36" (914 mm)
Maximum Diameter Cut 28" (711 mm)
Maximum Chain Speed 51 ft/sec (15.5 m/sec)
Chain Oil Tank Capacity 5 gal. (18.9 L)
Chain Tensioner Automatic "Jet Fit"
Feed Rollers 2
Feed Roller Motors 2
Roller Motor Brand Poclain MS11
Roller Motor Type Piston
Motor Size (2 Speed) 1,147 cc
Maximum Feed Force 11,792 lbf (52.4 kN)
Maximum Feed Speed 15 ft/sec (4.6 m/sec)
Maximum Roller Opening 22" (558 mm)
Rotator/Leveler Torque 15,000 ft-lbf (20,337 Nm) at 2,500 psi (172 bar)
Rotator/Leveler Rotation 360° unlimited

High Pressure Filter

A high pressure filter between carrier and attachment provides added protection.

Bar and Chain Grease System

Herbicide Stump Spray System