IQAN Control System
IQAN system offers precise control of the harvesting head at all times.
360-Degree Rotation
360-degree continuous rotation with center hose routing enhances maneuverability when cutting, while also protecting hoses from tangling or tearing, thereby reducing hose replacement costs.
Low Maintenance
Built with fewer moving parts, the CF18's only daily service requirements is greasing, thereby reducing downtime.
SPECIFICATIONS +
DIMENSIONS -
| Overall Height |
83.25" (211 cm) |
| Width (Arms Open) |
61" (155 cm) |
| Width (Arms Closed) |
52.5" (133 cm) |
| Total Operating Weight |
5,000 lbs (2,268 kg) |
HYDRAULICS +
| System |
IQAN |
| Valve Package |
Parker |
| Hydraulic Flow Requirement (Minimum) |
80 GPM (302 LPM) |
| Hydraulic Pressure Requirement (Minimum) |
4,500 psi (310 bar) |
ELECTRICAL +
| Joral Encoders |
Non-contact |
| Electrical System Voltage |
24-volt |
DELIMBING & CUTTING +
| Delimb Pressure |
Adjustable with float |
| Top Delimb Knife |
Fixed |
| Movable Delimb Arms |
2 |
| Maximum Knife Opening |
29" (737 mm) |
| Maximum Full Coverage Delimb Diameter |
20" (508 mm) |
| Minimum Full Coverage Delimb Diameter |
4.5" (114 mm) |
| Main Saw - Bar Pitch |
0.75" (19 mm) |
| Bar Length |
33" (838 mm) |
| Maximum Diameter Cut |
24" (610 mm) |
| Maximum Chain Speed |
51 ft/sec (15.5 m/sec) |
| Chain Oil Tank Capacity |
4 gal. (15.1 L) |
| Chain Tensioner |
Automatic "Jet Fit" |
FEEDING +
| Feed Rollers |
2 |
| Feed Roller Motors |
2 |
| Roller Motor Brand |
Poclain MS11 |
| Roller Motor Type |
Piston |
| Motor Size |
1,147 cc |
| Maximum Feed Force |
11.792 lbf (52.4 kN) |
| Maximum Feed Speed |
15 ft/sec (4.6 m/sec) |
| Maximum Roller Opening |
18.5" (470 mm) |
ROTATION +
| Rotator/Leveler Torque |
11,300 ft-lbf (15,321 Nm) at 2,450 psi (169 bar) |
| Rotator/Leveler Rotation |
360° unlimited |
OPTIONS +
High Pressure Filter
A high pressure filter between carrier and attachment provides added protection.
Bar and Chain Grease System
Herbicide Stump Spray System
